Applicatins:
Used for 55-110 dtex/96-192f(0.5≤DTY dpf ≤1.0) POYspinning.
Main Characteristics:
●JK81seriallzed extruder with LTM pin screw and A.C.
Inverter drive & adopting direct spinning process.
●Short melt residual time, energy saving spin beam without
dead comers in melt pipes. Manifold with static mixer and
bottom mounted spin pack with good mixing.
●Large spinneret with capillaries suitable for fine denier fiber.
●Annealer shortening the length of “delaying height”, adjustable
oil spray device imported oil jet, yam guide and finish oil pump.
●Uniform and stable air blow of quenching chamber.
●Double HTM heating system enabling slightly higher
temperature in spin pack than that in melt pipes and CPF to
reduce the viscosity drop of melt, which is good for spinning.
●Tension adjustable between first and second cold godets.
●Manual or automatic winders.
Technical specification
项目Item |
单位Unit |
数据Data |
全机部位数No.of.pos. |
|
切片纺:6、8、12、16 直接纺:18、20、24、32、36、48、72 |
成品纤度Titer |
dtex |
55 ~ 110、83 ~ 167 |
每位纺丝头数No.of.ends/pos |
|
8、10、12 |
纺丝位距Gauge |
mm |
900、1000、1050、1100、1150、1250、1280、1350、1400 |
螺杆尺寸Dia.of.screw |
mm |
ф80、ф90、ф105、ф120、ф135、ф150 |
组件型式/喷丝板尺寸Dia. of. spinneret |
mm |
下装式杯型组件/ф100、Φ95、Φ90、Φ85、ф75 (bottom-mounted cylindrical spin pack) |
计量泵规格Spec. of spin pump |
cc/rev |
6、8、10、12×1.6、1.8、2.4、3.0、3.5、4.5 |
侧吹风窗高度Height of quenching chamber |
mm |
1000、1200、1300、1400 |
卷绕速度Winding speed |
m/min |
2000~3500 |
配用卷绕头Matching winders |
|
BWA系列 BWA series |
每位卷绕头数×筒子数No.of.winders×No.of.tubes |
|
1×8、1×10、1×12 |
Note: Not all parameters can be combined, machine configuration depends onproduct requirement