Shafts, take-up device and friction unit are all driven by AC motors, which are controlled by inverters. All setting including speed ratio between different rollers, over-feed of take-up winding, D/Y ratio and crossing angle can be carried out by computer.
|
|
............................................................................................................................
Friction Unit: it includes 8 type friction unit, , the guide disk and knife disk is ceramic.
|
|
............................................................................................................................
The 1st and 2nd heater is dowtherm system,whose setting range is between 140-250℃(±1℃)。
|
|
|
............................................................................................................................
We choose the aluminum beam as 5 pieces of roller beam, so that it can reduce vibration of machine at high speed. Each roller equipped safe jackets and traverse units for avoiding abrasion on the same position and prolonging the life of aprons or nipper roll.
|
|
The take-up winding controlled by computer,Stroke modification device is modifying the length of stroke circularly to control edge density of package
|
|
Oiling system: the stainless steel of oil level lies between the 3rd roller and take up winding; oiling rate can be changed by setting the speed of oil roller, which is driven by a small inverter. |
|
............................................................................................................................
Exhausting device: the exhausting pipe is assembled at the upper end of primary heater, which is used for taking finish fume out. |
|
............................................................................................................................
卷绕成型系统采用计算机控制,带动程修正,成型优良,可生产双锥
形和直边形筒子。
............................................................................................................................
卷绕
上油 单层油轮上油,采用变频无级调速,上油量均匀。
|
|
吸油烟 在第一热箱上端口排放纺丝油剂烟雾,确保生产环境清洁。 |
|
(KW)Total power |
Drive |
V型 |
83.5 |
83.5 |
90.25 |
M型 |
83.5 |
83.5 |
90.25 |
||
The primary heater |
V型 |
68 |
74.8 |
81.6 |
|
M型 |
80 |
88 |
96 |
||
The 2nd heater |
V型 |
24 |
26.4 |
28.8 |
|
M型 |
24 |
26.4 |
28.8 |
||
Auxillary Driving power |
V型 |
9.09 |
9.09 |
9.09 |
|
M型 |
9.09 |
9.09 |
9.09 |
||
Total power |
V型 |
184.59 |
193.79 |
209.74 |
|
M型 |
196.59 |
206.99 |
224.14 |
||
Dimension with creel |
V型 |
18820*6420*5253 |
20260*6420*5253 |
21700*6420*5253 |
|
M型 |
18820*6420*4905 |
20260*6420*4905 |
21700*6420*4905 |